The “classic” instruments will be discontinued in the manufacturing program of WYLER AG. Although the technology was constantly improved the latest requirements towards such an instrument can not be fulfilled anymore.

The “classic” instruments will be completely replaced by the new type “NT”.

The “classic” instruments are based on a analogue measuring concept. The level’s output is ± 2000mV corresponding to 1 mV/Digit.
When connected to the correct adapter the instruments can be used for measurements with the WYLER software “Levelsoft”.

The most important features of the MINILEVEL NT are:

• Large LCD display

• 2 different sensitivity ranges selectable, what allows universal use

• Precise zero point adjustment possible by using push buttons

• A lightweight, compact instrument without cables (no accidental tearing down the instrument)

• Quickly available reading on the spot

The new instrument of the “NT” family was developed from the scratch according to the users requirement. These instruments will in the future replace the “classic” instruments.

The most important features of the MINILEVEL NT / LEVELTRONIC NT are: 

• Large LCD display showing directly the measured value in the unit selected. 2 different sensitivity ranges selectable (MINILEVEL NT only)
• Precise zero point adjustment possible by using push buttons.
• Rugged precision aluminium housing for protection against external influences.
• State of the art digital technology combined with the use of modern electronic components allow signal output in digital or analogue form.
• Possibility of connection to the LEVELMETER C25 or to the LEVELMETER 2000, as well as to the LEVELADAPTER 2000 combined with the flatness measurement software „WYLER-LEVELSOFT“
• Power supply with common 1.5 V - batteries.
• Fulfils the CE requirements (Immunity against electromagnetic smog)
• All standard measuring bases are available
• Available with calibration in sec.of arc 
  or in µm/m
• The influence of humidity changes were drastically reduced by implementing the “SEALTEC Technoloy”

The instruments technology is based on a completely digital measuring system. Despite this an analogue output is still available whereas ±2000mV corresponding are to 1 mV/Digit.

The most important features of the LEVELTRONIC NT are:

• Small compact precision instrument with external display, especially useful when the result should be seen remotely or when no direct view to the instrument is possible. (The display unit can be brought to the point of adjustment)

• Quickly available external reading

• One measuring range only

Both type of instruments:

• Rugged precision aluminium housing for protection against external influences

• State of the art digital technology combined with the use of modern electronic components allow signal output in digital or analogue form

• Possibility of connection to the LEVELMETER C25 or to the LEVELMETER 2000, as well as to the LEVELADAPTER 2000 combined with the flatness measurement software „WYLER-LEVELSOFT“

• Power supply with common 1.5 V - batteries

• Fulfils the CE requirements (Immunity against electromagnetic smog)

• All standard measuring bases are available

• Available with calibration in sec.of arc or µm/m

• The influence of humidity changes were drastically reduced by implementing the “SEALTEC Technoloy” 

• The instruments technology is based on a completely digital measuring system. Despite this an analogue output is still available whereas ±2000mV corresponding are to 1 mV/Digit

• External power supply through a Levelmeter C25, Levelmeter 2000 or Levelmeter „light“