|
|
| LEVELTRONIC NT
Type 41 The new LEVELTRONIC
NT / A41, without integrated display is the successor of the well known LEVELTRONIC series
A40. In combination with the LEVELMETER C25 or the LEVELMETER 2000, both used as display
units, are primarily envisioned for the flatness measurement of surface plates as well as
the measurement of geometrical errors of machines. |
|
|
The new product line LEVELTRONIC NT / 41 has
the following advantages:
- Rugged precision aluminum housing for protection against
external influences.
- State of the art digital technology combined with the use of
modern electronic components allow signal output in digital or analogue form.
- Possibility of connection to the LEVELMETER C25 or to the
LEVELMETER 2000, as well as to the LEVELADAPTER 2000 combined with the flatness
measurement software „WYLER-LEVELSOFT"
- External power supply by using LEVELMETER C25 or LEVELMETER
2000
- Fulfills the CE requirements (Immunity against
electromagnetic smog)
- All standard measuring bases are available
- Available with calibration in sec. of arc or in inclination
(mm/m).
- New with SEALTEC-Technology
available
|
|
Measuring technique:
Combined analogue / digital technology / changing the pendulum movement into a
capacitive signal.Features:
Useful for mobile applications, compact, remote readout by using LEVELMETER C25 or
LEVELMETER 2000, not sensitive to magnetic field, basic measuring principle in the market
close to 20 years.
Measuring bases:
Depending on the use various types of bases are available. The measuring unit is
mounted to the respective base and adjusted accordingly.
Most of the instruments can be equipped with magnetic inserts. |
| Sensitivity:
1µm/m-instrument |
Sensitivity 1µm/m
or alternatively
Sensitivity 0.2Arcsec |
| Sensitivity:
5µm/m-instrument |
Sensitivity 5µm/m
or alternatively
Sensitivity 1Arcsec |
| Sensitivity:
10µm/m-instrument |
Sensitivity 10µm/m
or alternatively
Sensitivity 2Arcsec |
|
Specifications
LEVELTRONIC NT / 41 |
| Sensitivity
|
±1 µm/m
or
±0.2 Arcsec |
±5 µm/m
or
±1 Arcsec |
±10 µm/m
or
±2 Arcsec |
| Display
range |
±2 mm/m
±400 Arcsec |
±10 mm/m
±2000 Arcsec |
±20 mm/m
±4000 Arcsec |
Limits
of error up to
0.5 Full-scale
(DIN 2276) |
max. 1%
of
measured value |
max. 1%
of
measured value |
max. 1%
of
measured value |
Limits
of error from
0.5 to Full-scale / FS
(DIN 2276) |
max. 1% of
(2*Measured value - 0.5*FS) |
max. 1% of
(2*Measured value - 0.5*FS) |
max. 1% of
(2*Measured value - 0.5*FS) |
| Display
|
within max.
3 Sec. |
within max.
3 Sec. |
within max.
3 Sec. |
| Analogue
output |
1mV equal to
1 µm/m
1mV equal to 0.2 Arcsec |
1mV equal to
5 µm/m
1mV equal to 1 Arcsec |
1mV equal to
5 µm/m
1mV equal to 2 Arcsec |
| Digital
output |
RS485
asynchron 9600
Baud, 7 Bit, 2 Stopbits, no parity |
RS485
asynchron 9600
Baud, 7 Bit, 2 Stopbits, no parity |
RS485
asynchron 9600
Baud, 7 Bit, 2 Stopbits, no parity |
| Temperature
error/°C |
max. 0.1%
F.S. |
max. 0.1%
F.S. |
max. 0.1%
F.S. |
| External
power supply |
+5V DC, 20mW
|
+5V DC, 20mW
|
+5V DC, 20mW
|
Operating
temperature range |
0 up to
40°C |
0 up to
40°C |
0 up to
40°C |
Storage
temperature range |
-20 up to
+70°C |
-20 up to
+70°C |
-20 up to
+70°C |
|
|
General remarks:
These instruments are compatible with the WYLER LEVELADAPTER SET
2000 hooked up to a IBM compatible PC. With this configuration various types of
flatness measurements can be done and the respective graphic output together with a
protocol is available. |
For Pricing Information Please Call
215-464-9300 or email dhayes@warrenind.com |
|
|
