|
|
ENGINEER
SET NT
The ENGINEER SET is the ideal Measuring system for flatness
measurement, measurement of geometrical errors on machines and systems of all kinds in
workshop conditions.
The Engineer set is especially well suited for the
specialist working on geometrical errors on machines. The differential measurement allows
excellent measuring results in leveling and finding rotational errors. The complete unit
is packed in a comfortable case for easy handling and transportation. This gives a mobile
measuring system of universal use. |
 |
Engineer
SET 27 with
LEVELMETER 2000 in combination with a laptop and the
software LEVELSOFT |
|
| Standard configuration of the ENGINEER SET NT: |
- 1 LEVELTRONIC NT 41 Horizontal
base;
LEVELTRONIC with flat hardened steel base 150 mm with dust grooves, sensitivity 5 µm/m
- 1 LEVELTRONIC NT 41 Angular
base;
LEVELTRONIC with angular prismatic type base for surfaces and shafts, length 150 mm, for
horizontal and vertical measurements. sensitivity 5 µm/m
- 1 LEVELMETER C25
or alternatively
- 1 LEVELMETER 2000
- 2 Cables each 2,5 m length
|
|
|
| The complete unit is packed in a handy case. The engineers set is also available with other sensitivities as
above stated. For flatness measurements of surface plates a sensitivity of 1 µm/m is
useful.
In addition the system may be connected to an IBM
compatible PC by using the WYLER LEVELADAPTER 2000. This allows the comfortable,
timesaving computer guided measurement.
|
NEW with LEVELMETER
"LIGHT"
The engineer set no 27 can be
supplied with a LEVELMETER „LIGHT“ instead of the standard supply with a
LEVELMETER 2000. The
LEVELMETER „LIGHT“ is a more versatile unit than the REMOTE DISPLAY but can also be used as a more simplified unit of the LEVELMETER 2000. The LEVELMETER „LIGHT“ serves as
display unit or as interface between instrument and PC. |
|
Engineer
SET 27 with
LEVELMETER "LIGHT" in combination with a laptop and the
software LEVELSOFT |
|
- 1 LEVELTRONIC NT 41 Horizontal
base;
LEVELTRONIC with flat hardened steel base 150 mm with dust grooves, sensitivity 1 µm/m
- 1 LEVELTRONIC NT 41 Angular
base;
LEVELTRONIC with angular prismatic type base for surfaces and shafts, length 150 mm, for
horizontal and vertical measurements. sensitivity 1 µm/m
- 1 LEVELMETER "LIGHT"
- 2 Cables each 2,5 m length
|
|
RADIOMODULE WYLER for ENGINEER SET no 27 |
With the newly developed
RADIOMODULE WYLER precise
inclination measurements can be performed without the interference of cables. The data is
transmitted faultless from the instrument to the receiver module respectively to he
Levelmeter 2000 or the Levelmeter "light".
From the
Levelmeter the transmission to the PC / Laptop is done in the conventional way via RS232
cable. In the PC / Laptop the measuring results can be computed with the software LEVELSOFT.
The RADIOMODULE
WYLER can be supplied with new instruments or as an upgrade set for
existing instruments of the NT family. |
|
ENGINEER
SET no 27 including RADIOMODULE
WYLER
1 LEVELTRONIC NT 41
Horizontal base with integrated RADIOMODULE WYLER;
LEVELTRONIC with flat hardened steel base 150 mm with dust grooves, sensitivity 1 µm/m
1 LEVELTRONIC NT 41
Angular base with integrated RADIOMODULE WYLER;
LEVELTRONIC with angular prismatic type base for surfaces and shafts, length 150 mm, for
horizontal and vertical measurements. sensitivity 1 µm/m
1 LEVELMETER 2000 or
LEVELMETER "LIGHT" with a
RADIOMODULE BOX WYLER and cable
|
|
For Pricing Information Please Call
215-464-9300 or email dhayes@warrenind.com |
|
|
