|
|
23-1190
Precision Optical Clinometer- Reads to 10 seconds (estimation to 2")
23-1195 Precision Optical Clinometer- Reads to 1 second (estimations to .2") W-K's precision optical clinometers have a 360 degree operating
range reading to either 10 seconds (Model 23-1190) or to 1 second (Model 23-1195). They
are used for calibration, alignment, machine setting, boresighting, fire control
alignment, and inspection when the tightest tolerances are expected and required. They can
also be used as a circular worktable in either horizontal or vertical planes when fitted
with the optional Warren-Knight Worktable and Supporting Base. When used in conjunction
with the W-K Mirror Reflector and W-K Autocollimator, these clinometers can be used to
precisely measure angles in any plane. The optical reading system and the bubble unit can
be illuminated by daylight or by a low-voltage lamp system. When the utmost precision is
required use only W-K's optical clinometers. Request
more information: angle@warrenind.com |
|
|
W-K-23-1125
Clinometer Work Table is interchangeable with the level vial housing, enabling small parts
to be attached to the clinometer axis. With the clinometer placed in the horizontal
position the table will precisely hold a symmetrically placed load of 5 lb (2.2 kg) for
precision angle measurement. Table diameter 4 ¾" (20mm).The WK-23-1190 and the
WK-23-1195 require the horizontal base WK-23-1120 to support the clinometer in the
horizontal position.WK-23-1130 Autocollimating Mirror Attachment (Not shown)This replaces
the level vial housing and enables the clinometer to be used, either vertically or
horizontally, with an autocollimator for setting angles.WK-23-1120 Clinometer Supporting
Base The supports the WK-23-1190 and the WK-23-1195 horizontally when it is used with the
worktable or reflector. WK-23-1110 Illumination System This accessory is useful when using
the WK-23-1190 or the WK-23-1195 in poor lighting conditions or when the clinometer is
used horizontally. The illumination system replaces the mirror with the lamp housing
assemblies. The Illumination System includes 2 lamp housings, "y" adapter, wire
and power supply (110 VAC Primary, 6 Volt Secondary). Request more information: angle@warrenind.com |
|
|
23-2052 Drum Clinometer (100 degree range, reads to 1 minute)
23-2152 Drum Clinometer (100 degree range, reads to 30 seconds)
23-2252 Drum Clinometer (100 degree range, reads to 20 seconds)
23-2054 Drum Clinometer (360 degree range, reads to 1 minute)
23-2154 Drum Clinometer (360 degree range, reads to 30 seconds)
23-2254 Drum Clinometer (360 degree range, reads to 20 seconds)Rugged precision instruments for measuring or determining tilt and
is designed for long life and easy handling. Angles are read directly to one minute, 30
seconds, 20 seconds...depending upon model. The lower 6" x 1-1/2" base plate and
the compensating screw is suitable for use on shafts, propellers, wing surfaces, machine
tools, test tables, production fixtures, and more. The lower base plate and compensating
screw may be removed permitting the fixed base to be used in contact with the working or
reference surface. All working parts are effectively enclosed - dust tight case assuring
abrasion free contact between the accurately ground arc and worm gear. The lower base
plate provides in addition to flat pads, a shallow V with clearance cut and center relief.
Complete with instructions and storage case. Request more information: angle@warrenind.com |
|
|
23-2080
Pendulum Clinometer (360o, reads to 1 minute 30 seconds) The WK pendulum clinometer is easy to use and invaluable for use in
awkward locations. Simple to use, yet accurate to suit many applications. Features
extended vernier with magnifier which makes reading easy. The instrument incorporates a
drum locking device which enables the operator to secure the indication of angle before
the clinometer is removed from the surface. Request
more information: angle@warrenind.com |
|
|
23-2060
Quadrant This Precision Quadrant Level was
originally made for the Navy and is graduated to give a direct reading to 10 seconds with
a range of -2 to +110 degrees. The quick accurate leveling of the 20 second per 2mm level
vial is accomplished by means of a clamp and slow motion tangent screw. This clinometer
has been used in shipbuilding yards to calibrate fire control directors and most other
alignment applications. Arc radius 6-7/8". Base 5" x 12". Complete with
case. Request more information: angle@warrenind.com |
|
|
23-4000
Block Level- Reads to 1 minute
23-4005 Block Level- Reads to 5 seconds
23-4015 Block Level- Reads to 15 seconds
23-4020 Block Level- Reads to 20 secondsModel
23-4000 Series Micrometer Drum Block Levels are ideal for inspection activities and for
shop applications. Block levels have gained widespread acceptance in shipbuilding,
aircraft development, and maintenance activities as they provide a rapid means of
accurately and reliably determining angles of inclination with simple adjustment. Range +3
degrees to -2 degrees. Measures 8" x 2" x 3.75". 4 lbs. With case. Request more information: angle@warrenind.com |
|
|
23-2700 Coincidence Level This
level provides fast, precise, accurate leveling of any flat surface, establishing a true
horizontal plane within 1/4 second of arc or better. The coincidence or split-bubble level
is conveniently viewed from the right angled eyepiece. The eyepiece can be mounted for
sighting in, at almost any angle from 0 to 90 degrees. Mounting holes are provided for
permanent mounting to fixtures. With case. Request
more information: angle@warrenind.com |
|
|
Spirit Level Vials Warren-Knight
offers a wide variety of precision ground, custom, circular, ordinance and standardized
commercial vials in quantities and sensitivity ranges of your choice. We have standardized
mounts as well as customized designs for mounting depending upon your application
requirement. Sensitivities from 600 to 2 arc seconds can be provided with temperature
ranges from minus 60 degrees to 200 degrees F depending upon the fluid used for filling. Request more information: angle@warrenind.com |
|
|
Ball
Type ClinometersManual Inclinometers of glass tube and ball construction with custom color
backgrounds, engraved markings and customer specified color zones to help prevent vehicle
rollover.
Request more information: angle@warrenind.com |
|
|
Hand
Held ClinometersHeight, slope and vertical angle measurements made easy! These versatile
instruments can be used to measure heights of trees, poles, towers, buildings; measure
slopes for preliminary surveying, grade work, site drainage; measure vertical angles for
engineering and surveying projects, satellite and microwave dish installation and more.
Request more information: angle@warrenind.com |
|
|
23-1990
Propeller Protractor A four-way precision
instrument that measures angles directly between any two planes or any number of planes,
such as setting a detachable blade type propeller on an airplane. Snug fitting circles are
tooled to close tolerances that minimize the error and play found in other protractors.
The circle and plate vial are accurate to 45 minutes per 2mm. The vernier reads to six
minutes and can be set to read angles at any position. Measures 7.25" x 7.25".
Request more information: angle@warrenind.com |
|
|
Highly
precise and accurate inclination sensors capable of sampling many times per-second and
transmitting data over long distances. Designed for rugged environments, these
sensors excel in both static and dynamic environments. With temperature compensation,
these sensors can operate to -400 C. Custom housings are available to
suit any mounting configuration. Request
more information: angle@warrenind.com |
|
|
Digital
Protractor
Capable of providing 3600's of range, this unit offers accuracy of
0.050 . This unit is amazingly versatile and priced affordably making it
the low cost solution to quick and painless angle measurement. The available RS-232
output port makes this unit the easy to integrate. Also available with a magnetic
base. Request more
information: angle@warrenind.com |
|
|
AccuStar®
The AccuStar® electronic clinometer offers high performance, low cost, and
versatile design capabilities.
CE certified
Resolution of 0.001° and a ±60° range
Rugged, high impact package just 2" in diameter
Easily integrated into a wide variety of applications
Choice of analog, ratiometric, digital pulse width, or serial output
Request more information: angle@warrenind.com |
|
|
AccuStar® II
This revolutionary angle measurement sensor combines
the function of two clinometers in one package. AccuStar® II provides output signals
directly proportional to the relative tilt of two axes at right angles to each other.
Pin selectable analog or digital output
Comparably priced, but with capabilities far superior to mercury switches or other low
cost level sensors
Request
more information: angle@warrenind.com |
|
|
AccuStar® II DAS 30
The DAS-30 is a miniature dual axis sensor
designed to meet the needs of OEM high volume designs for automotive, off-road vehicles
and heavy equipment applications.
- ±30° operation in a unique PC board mountable design
- Proprietary dome shaped construction
- Operating temperature range of -40° to 85°C offers extended
performance in rugged conditions
Request
more information: angle@warrenind.com |
|
|
AngleStar®
A two part system including a capacitance-based
electronic sensor and an LCD readout.
- Angular position is displayed digitally with a resolution of
0.1° or 0.01°
- Sensor can be mounted up to 200 feet (60 meters) from the
readout
- Three standard display models offer a choice of range and
resolution
Request
more information: angle@warrenind.com |
|
|
AngleStar® - Model DP 45
Provides instant digital display of level, angle
and tilt.
- Easy-to-use, hand held battery powered package
- Digital display eliminates the need to interpret a bubble or
vernier scale
- Reads in degrees
Request
more information: angle@warrenind.com |
|
|
The Minilevel NT is well suited for precsion measurement of small angles. The
NT features a large LED digital display and two selectable sensitivities. Unit is built of
precision aluminum housing for protection against external influences. Power supply with
common 1.5 V batteries. Available with calibration seconds of arc or in inclination.
Accurcies to 0.2 arc seconds, or 2.0 arc seconds depending on the model chosen. Request more information: angle@warrenind.com |
|
|
- A highest possible precision over the large measuring range
of +/- 45° with integrated temperature compensation.
- Effortless zero adjustment by using the integrated software
and a reversal measurement.
- Easy to calibrate due to
implemented software guidance and the calibration aids as part of the delivery.
- Large digital display with the
advantage to set all the measuring units commonly used.
- Built-in possibility to connect an
additional instrument for differential measurement or ZEROTRONIC sensors by using
the serial port.
- Rugged stainless steel housing
with prismatic bases.
- Built-in cross vial for easy alignment of the secondary
vertical setting direction in order to eliminate „twist error".
- State of the Art digital technology.
- The instrument is fully compatible with the whole range of
digital sensors of WYLER AG.
- Powered by common 1.5 V batteries,
rechargeable batteries or with mains adapter.
- Fulfills the strict CE requirements (Immunity against
electromagnetic smog).
- As an option magnetic inserts are available.
. Request
more information: angle@warrenind.com |
|
|
Digital electronic inclinometer for all kinds of applications. The four
precisionsurfaces of the housing aloow the measurements to be taken in each quadrant. The
inclination data can be displayed in all standard measuring units. The special output
allows the direct connection to a printer, or to an RS-232 interface. Measuring range of
+/- 10 degrees or +/- 45 degrees depending on the model chosen. Request more information: angle@warrenind.com |
|
|
The big brother to the Clinotronic, the Fowler/Wyler Digitronic is a more
robust design intended for field and outdoor applications. It shares most of the features
of the Clinotronic, while offering the same ease of use and versatility. Digitronic
uses a 90° angular base with "V" surfaces for mounting on cylindrical parts, a
cross vial for positioning and a total measuring range of ± 45°. Total measuring
accuracy is increased to 0.01° within 1 arc ° Request more information: angle@warrenind.com |
|
|
The basic Warren-Knight Shipboard Alignment System consists of three sensors
capable of being mounted up to 1000 meters from the central data collection device. The
sensors are available in varying degrees of accuracy and varying ranges. Each sensor
assembly includes a block housing (available with easy mount adjustable brackets that
eliminate the need of clay to keep sensors positioned along a straight edge), cable, and a
transceiver converter capable of powering the sensor signal up to 1000 meters. The
collection station includes a multi-plexer to handle the cabling from all three sensors,
three transceiver converters to change the signal to RS232, and a laptop computer. The
computer comes with installed software designed to record and interpret the data. The
software also has smoothing and filtering capabilities to ensure the highest quality of
data. System capable of achieving accuracies of 1 arc second depending on the model sensor
chosen. For more information please contact a product specialist. Request more information: angle@warrenind.coma |
